Our coil is sized the same as the original but made up into two pieces, the outer ring where you wrap the wire and the central body where the clutch and buzzer. 

With this solution, you can rinse off the wire from the mucilage, or soak it in water to rehydrate him and riaquistare the 'original elasticity.

Top seal, and powerful buzzer

Video: Click here to see how you mount

To the left an original coil, to the right the central body with the coil 025 coupled Holders

Not having to do the bottom, you can see the perfect line lay .... The central body is full of friction and buzzer as the originals, and as you can see from the video replaces only the outside, convenience is mainly in the fact that can buy a main building and several of the outer ones with a capacity of different wire ... One interesting thing is that if you have several reels example. CI4 a new one and an old Titanos or other old model, you buy the central body specific to that model and those from the outer parts are interchangeable between all of them ...

Montate su Ultegra CI4 - xsb.

From today, the new Ultegra CI4 XSA, XSC, XSB or up to 60 grams less than the original ...... 

Here you can see our "central body" with a coil with 018 imbobinati 300 meters of 0.16, you can see the perfect line lay, the buzzer sounds twice that of our original. 

WARNING: The total weight of our central body coil 018 weigh only 137 grams, loaded with 300 yards of total 144 weighs 0.18 grams. 

The coil original size 10000 including filling the bottom and 300 meters of 0.18 weighs 170 grams, that is 27 grams more of our system! 

If you use the 14000 the weight of the bottom wire more than fishing is to weigh 200 grams and more, that is to say that our system including wire, weighs 60 grams less than the original! 

Mounted on a Ultegra XSA

All made of machined aluminum by solid bars Anticorodal AC100, an alloy resistant to sea water, with the additional surface treatment anodizing neutral which further enhances the corrosion resistance and surface hardness, significantly reducing friction with the coils in the launch. 

  Are not overly conical to avoid sparruccamenti, they have the right taper, we considered that quandosi envelop the coils will space of about 10 millimeters, in 10millimetri height of the coil, the diameter is reduced to the thickness of the wire, therefore in front of the coil unwinding not creates resistance to abrasion to the wire as it remains lower than the diameter of a little more. 

Being Billet you get the maximum concentricity and balance, as in there are blowholes of material you could possibly create in a merger. 

THREE MEASURES OF COIL WITH DIFFERENT CAPACITY: 

coil can contain max = 250 m 0.35 

coil = 025 can contain 250 meters of 0.25 

coil = 018 can contain 250 meters of 0.18 to 0.20